PlanetSquires Forums

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: CWindow RC04  (Read 2366 times)

José Roca

  • Moderator
  • Guru Member
  • *****
  • Posts: 3208
CWindow RC04
« on: May 02, 2016, 01:16:09 PM »

Cwindow release candidate 4.

José Roca

  • Moderator
  • Guru Member
  • *****
  • Posts: 3208
Re: CWindow RC04 - Progress Bar Custom Control
« Reply #1 on: May 02, 2016, 01:25:06 PM »

I have adapted Börje's old PGBAR3D control using a class and make it DPI and unicode aware.

You can set the options using SendMessageW, the class methods or a mix of the two.

Example using SendMessage:

Code: [Select]
' ########################################################################################
' Microsoft Windows
' File: CW_PG3D.fbtpl
' Contents: CWindow with a PGBAR3D control
' Compiler: FreeBasic 32 & 64 bit
' Copyright (c) 2016 Jose Roca. Freeware. Use at your own risk.
' THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
' EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
' MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE.
' ########################################################################################

#define unicode
#INCLUDE ONCE "windows.bi"
#INCLUDE ONCE "Afx/CWindow.inc"
#INCLUDE ONCE "Afx/CPgBar3D.inc"

USING Afx.CWindowClass
USING Afx.CPgBar3DClass

enum
   IDC_START = 1001
   IDC_REVERSE
   IDC_OPTFAST
   IDC_OPTSLOW
   IDC_PGBAR1
   IDC_PGBAR2
   IDC_PGBAR3
end enum

DECLARE FUNCTION WinMain (BYVAL hInstance AS HINSTANCE, _
                          BYVAL hPrevInstance AS HINSTANCE, _
                          BYVAL szCmdLine AS ZSTRING PTR, _
                          BYVAL nCmdShow AS LONG) AS LONG

   END WinMain(GetModuleHandleW(""), NULL, COMMAND(), SW_NORMAL)

' ========================================================================================
' Window procedure
' ========================================================================================
FUNCTION WndProc (BYVAL hWnd AS HWND, BYVAL uMsg AS UINT, BYVAL wParam AS WPARAM, BYVAL lParam AS LPARAM) AS LRESULT

   STATIC slow AS LONG, allSteps AS LONG

   SELECT CASE uMsg

      CASE WM_CREATE
         EXIT FUNCTION

'      CASE WM_SYSCOMMAND
'         ' // Ignore the red X (close) button
'         IF (wParam AND &HFFF0) = SC_CLOSE THEN EXIT FUNCTION

      CASE WM_COMMAND
         SELECT CASE LOWORD(wParam)
            CASE IDCANCEL
               ' // If ESC key pressed, close the application sending an WM_CLOSE message
               IF HIWORD(wParam) = BN_CLICKED THEN
                  SendMessageW hwnd, WM_CLOSE, 0, 0
                  EXIT FUNCTION
               END IF

            CASE IDC_OPTFAST
               IF HIWORD(wParam) = BN_CLICKED THEN
                  slow = FALSE
               END IF

            CASE IDC_OPTSLOW
               IF HIWORD(wParam) = BN_CLICKED THEN
                  slow = CTRUE
               END IF

            CASE IDC_START
               EnableWindow(GetDlgItem(hwnd, IDC_START), FALSE)   ' // Disable the start button
               SCOPE
               DIM i AS LONG, hCtl AS HWND, wszText AS WSTRING * 260
               FOR i = 1 TO 100
                  IF i < 34 THEN
                     hCtl = GetDlgItem(hwnd, IDC_PGBAR1)
                  ELSEIF i < 67 THEN
                     hCtl = GetDlgItem(hwnd, IDC_PGBAR2)
                  ELSE
                     hCtl = GetDlgItem(hwnd, IDC_PGBAR3)
                  END IF
                  SendMessageW hCtl, PGB_STEPUP, 0, 0
                  wszText = WSTR(i) & "%"
                  SendMessageW GetDlgItem(hwnd, IDC_PGBAR2), PGB_SETTXTBKG, CAST(WPARAM, @wszText), CTRUE
                  SendMessageW GetDlgItem(hwnd, IDC_PGBAR2), PGB_SETTXTBAR, CAST(WPARAM, @wszText), CTRUE
                  IF i MOD 2 = 0 THEN AfxDoEvents(hwnd)
                  IF slow THEN SLEEP 40
               NEXT
               END SCOPE
               EnableWindow(GetDlgItem(hwnd, IDC_REVERSE), CTRUE)   ' // Enable the reverse button
               EXIT FUNCTION

            CASE IDC_REVERSE
               EnableWindow(GetDlgItem(hwnd, IDC_REVERSE), FALSE)   ' // Disable the reverse button
               SCOPE
               DIM i AS LONG, hCtl AS HWND, wszText AS WSTRING * 260
               FOR i = 99 TO 0 STEP -1
                  IF i > 66 THEN
                     hCtl = GetDlgItem(hwnd, IDC_PGBAR3)
                  ELSEIF i > 33 THEN
                     hCtl = GetDlgItem(hwnd, IDC_PGBAR2)
                  ELSE
                     hCtl = GetDlgItem(hwnd, IDC_PGBAR1)
                  END IF
                  SendMessageW hCtl, PGB_STEPDN, 0, 0
                  wszText = WSTR(i) & "%"
                  SendMessageW GetDlgItem(hwnd, IDC_PGBAR2), PGB_SETTXTBKG, CAST(WPARAM, @wszText), CTRUE
                  SendMessageW GetDlgItem(hwnd, IDC_PGBAR2), PGB_SETTXTBAR, CAST(WPARAM, @wszText), CTRUE
                  IF i MOD 2 = 0 THEN AfxDoEvents(hwnd)
                  IF slow THEN SLEEP 40
               NEXT
               END SCOPE
               EnableWindow(GetDlgItem(hwnd, IDC_START), CTRUE)   ' // Enable the start button
               EXIT FUNCTION

         END SELECT

    CASE WM_DESTROY
         PostQuitMessage(0)
         EXIT FUNCTION

   END SELECT

   FUNCTION = DefWindowProcW(hWnd, uMsg, wParam, lParam)

END FUNCTION
' ========================================================================================

' ========================================================================================
' Main
' ========================================================================================
FUNCTION WinMain (BYVAL hInstance AS HINSTANCE, _
                  BYVAL hPrevInstance AS HINSTANCE, _
                  BYVAL szCmdLine AS ZSTRING PTR, _
                  BYVAL nCmdShow AS LONG) AS LONG

   ' // Set process DPI aware
   AfxSetProcessDPIAware

   DIM pWindow AS CWindow
   pWindow.Create(NULL, "CWindow with PGBAR3D control", @WndProc)
   pWindow.SetClientSize(300, 155)
   pWindow.Center

   ' // Add the buttons
   DIM hbtReverse AS HWND = pWindow.AddControl("Button", pWindow.hWindow, IDC_REVERSE, "&Reverse", 30, 115, 100, 23)
   DIM hbtStart AS HWND = pWindow.AddControl("Button", pWindow.hWindow, IDC_START, "&Start", 168, 115, 100, 23)
   EnableWindow(hbtReverse, FALSE)   ' // Disable the reverse button

   ' // Add the check boxes
   pWindow.AddControl("Option", pWindow.hWindow, IDC_OPTFAST, "Fast", 30, 60, 75, 23)
   pWindow.AddControl("Option", pWindow.hWindow, IDC_OPTSLOW, "Slow", 30, 80, 75, 23)

   ' // Add a label
   DIM hLabel AS HWND = pWindow.AddControl("Label", pWindow.hWindow, -1, "", 29, 14, 242, 25, , WS_EX_CLIENTEDGE)

   ' // Add the first progress bar
   DIM pPgBar1 AS CPgBar3D = CPgBar3D(@pWindow, IDC_PGBAR1, "", 30, 15, 80, 23)
   SendMessageW pPgBar1.hWindow, PGB_SETMAX, 33, 0                           ' Max number of teps
   SendMessageW pPgBar1.hWindow, PGB_SETBARCOL, PGB_RED, 0                   ' Bar color scheme

   ' // Add the second progress bar
   DIM pPgBar2 AS CPgBar3D = CPgBar3D(@pWindow, IDC_PGBAR2, "", 110, 15, 80, 23)
   SendMessageW pPgBar2.hWindow, PGB_SETMAX, 33, 0                           ' Max number of teps
   SendMessageW pPgBar2.hWindow, PGB_SETBARCOL, PGB_GOLD, 0                  ' Bar color scheme
   SendMessageW pPgBar2.hWindow, PGB_SETTXTON, 0, PGB_TEXTCUSTOM             ' Show own text
   SendMessageW pPgBar2.hWindow, PGB_SETTXTCOLBKG, BGR(255, 255, 0), 0       ' Backgound text color yellow
   SendMessageW pPgBar2.hWindow, PGB_SETTXTCOLBAR, BGR(0, 0, 0), 0           ' Bar text color black

   ' // Add the third progress bar
   DIM pPgBar3 AS CPgBar3D = CPgBar3D(@pWindow, IDC_PGBAR3, "", 190, 15, 80, 23)
   SendMessageW pPgBar3.hWindow, PGB_SETMAX, 33, 0                           ' Max number of teps
   SendMessageW pPgBar3.hWindow, PGB_SETBARCOL, PGB_GREEN, 0                 ' Bar color scheme

   ' // Requires: Build the bars
   SendMessageW pPgBar1.hWindow, PGB_BUILDBARS, 0, 0
   SendMessageW pPgBar2.hWindow, PGB_BUILDBARS, 0, 0
   SendMessageW pPgBar3.hWindow, PGB_BUILDBARS, 0, 0

   FUNCTION = pWindow.DoEvents(nCmdShow)

END FUNCTION
' ========================================================================================

Example using the class methods:

Code: [Select]
' ########################################################################################
' Microsoft Windows
' File: CW_PG3D.fbtpl
' Contents: CWindow with a PGBAR3D control
' Compiler: FreeBasic 32 & 64 bit
' Copyright (c) 2016 Jose Roca. Freeware. Use at your own risk.
' THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
' EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
' MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE.
' ########################################################################################

#define unicode
#INCLUDE ONCE "windows.bi"
#INCLUDE ONCE "Afx/CWindow.inc"
#INCLUDE ONCE "Afx/CPgBar3D.inc"

USING Afx.CWindowClass
USING Afx.CPgBar3DClass

enum
   IDC_START = 1001
   IDC_REVERSE
   IDC_OPTFAST
   IDC_OPTSLOW
   IDC_PGBAR1
   IDC_PGBAR2
   IDC_PGBAR3
end enum

DECLARE FUNCTION WinMain (BYVAL hInstance AS HINSTANCE, _
                          BYVAL hPrevInstance AS HINSTANCE, _
                          BYVAL szCmdLine AS ZSTRING PTR, _
                          BYVAL nCmdShow AS LONG) AS LONG

   END WinMain(GetModuleHandleW(""), NULL, COMMAND(), SW_NORMAL)

' ========================================================================================
' Window procedure
' ========================================================================================
FUNCTION WndProc (BYVAL hWnd AS HWND, BYVAL uMsg AS UINT, BYVAL wParam AS WPARAM, BYVAL lParam AS LPARAM) AS LRESULT

   STATIC slow AS LONG, allSteps AS LONG

   SELECT CASE uMsg

      CASE WM_CREATE
         EXIT FUNCTION

'      CASE WM_SYSCOMMAND
'         ' // Ignore the red X (close) button
'         IF (wParam AND &HFFF0) = SC_CLOSE THEN EXIT FUNCTION

      CASE WM_COMMAND
         SELECT CASE LOWORD(wParam)
            CASE IDCANCEL
               ' // If ESC key pressed, close the application sending an WM_CLOSE message
               IF HIWORD(wParam) = BN_CLICKED THEN
                  SendMessageW hwnd, WM_CLOSE, 0, 0
                  EXIT FUNCTION
               END IF

            CASE IDC_OPTFAST
               IF HIWORD(wParam) = BN_CLICKED THEN
                  slow = FALSE
               END IF

            CASE IDC_OPTSLOW
               IF HIWORD(wParam) = BN_CLICKED THEN
                  slow = CTRUE
               END IF

            CASE IDC_START
               EnableWindow(GetDlgItem(hwnd, IDC_START), FALSE)   ' // Disable the start button
               SCOPE
               DIM i AS LONG, hCtl AS HWND, wszText AS WSTRING * 260
               DIM pPgBar1 AS CPgBar3D PTR = CAST(CPgBar3D PTR, GetPropW(GetDlgItem(hwnd, IDC_PGBAR1), "CPGBAR3DPTR"))
               DIM pPgBar2 AS CPgBar3D PTR = CAST(CPgBar3D PTR, GetPropW(GetDlgItem(hwnd, IDC_PGBAR2), "CPGBAR3DPTR"))
               DIM pPgBar3 AS CPgBar3D PTR = CAST(CPgBar3D PTR, GetPropW(GetDlgItem(hwnd, IDC_PGBAR3), "CPGBAR3DPTR"))
               FOR i = 1 TO 100
                  IF i < 34 THEN
                     pPgBar1->StepUp
                  ELSEIF i < 67 THEN
                     pPgBar2->StepUp
                  ELSE
                     pPgBar3->StepUp
                  END IF
                  wszText = WSTR(i) & "%"
                  pPgBar2->SetBackText wszText, CTRUE
                  pPgBar2->SetBarText wszText, CTRUE
                  IF i MOD 2 = 0 THEN AfxDoEvents(hwnd)
                  IF slow THEN SLEEP 40
               NEXT
               END SCOPE
               EnableWindow(GetDlgItem(hwnd, IDC_REVERSE), CTRUE)   ' // Enable the reverse button
               EXIT FUNCTION

            CASE IDC_REVERSE
               EnableWindow(GetDlgItem(hwnd, IDC_REVERSE), FALSE)   ' // Disable the reverse button
               DIM pPgBar1 AS CPgBar3D PTR = CAST(CPgBar3D PTR, GetPropW(GetDlgItem(hwnd, IDC_PGBAR1), "CPGBAR3DPTR"))
               DIM pPgBar2 AS CPgBar3D PTR = CAST(CPgBar3D PTR, GetPropW(GetDlgItem(hwnd, IDC_PGBAR2), "CPGBAR3DPTR"))
               DIM pPgBar3 AS CPgBar3D PTR = CAST(CPgBar3D PTR, GetPropW(GetDlgItem(hwnd, IDC_PGBAR3), "CPGBAR3DPTR"))
               SCOPE
               DIM i AS LONG, hCtl AS HWND, wszText AS WSTRING * 260
               FOR i = 99 TO 0 STEP -1
                  IF i > 66 THEN
                     pPgBar3->StepDown
                  ELSEIF i > 33 THEN
                     pPgBar2->StepDown
                  ELSE
                     pPgBar1->StepDown
                  END IF
                  wszText = WSTR(i) & "%"
                  pPgBar2->SetBackText wszText, CTRUE
                  pPgBar2->SetBarText wszText, CTRUE
                  IF i MOD 2 = 0 THEN AfxDoEvents(hwnd)
                  IF slow THEN SLEEP 40
               NEXT
               END SCOPE
               EnableWindow(GetDlgItem(hwnd, IDC_START), CTRUE)   ' // Enable the start button
               EXIT FUNCTION

         END SELECT

    CASE WM_DESTROY
         PostQuitMessage(0)
         EXIT FUNCTION

   END SELECT

   FUNCTION = DefWindowProcW(hWnd, uMsg, wParam, lParam)

END FUNCTION
' ========================================================================================

' ========================================================================================
' Main
' ========================================================================================
FUNCTION WinMain (BYVAL hInstance AS HINSTANCE, _
                  BYVAL hPrevInstance AS HINSTANCE, _
                  BYVAL szCmdLine AS ZSTRING PTR, _
                  BYVAL nCmdShow AS LONG) AS LONG

   ' // Set process DPI aware
   AfxSetProcessDPIAware

   DIM pWindow AS CWindow
   pWindow.Create(NULL, "CWindow with PGBAR3D control", @WndProc)
   pWindow.SetClientSize(300, 155)
   pWindow.Center

   ' // Add the buttons
   DIM hbtReverse AS HWND = pWindow.AddControl("Button", pWindow.hWindow, IDC_REVERSE, "&Reverse", 30, 115, 100, 23)
   DIM hbtStart AS HWND = pWindow.AddControl("Button", pWindow.hWindow, IDC_START, "&Start", 168, 115, 100, 23)
   EnableWindow(hbtReverse, FALSE)   ' // Disable the reverse button

   ' // Add the check boxes
   pWindow.AddControl("Option", pWindow.hWindow, IDC_OPTFAST, "Fast", 30, 60, 75, 23)
   pWindow.AddControl("Option", pWindow.hWindow, IDC_OPTSLOW, "Slow", 30, 80, 75, 23)

   ' // Add a label
   DIM hLabel AS HWND = pWindow.AddControl("Label", pWindow.hWindow, -1, "", 29, 14, 242, 25, , WS_EX_CLIENTEDGE)

   ' // Add the first progress bar
   DIM pPgBar1 AS CPgBar3D = CPgBar3D(@pWindow, IDC_PGBAR1, "", 30, 15, 80, 23)
   pPgBar1.SetMaxSteps 33                                 ' Max number of teps
   pPgBar1.SetBarColor PGB_RED                            ' Bar color scheme

   ' // Add the second progress bar
   DIM pPgBar2 AS CPgBar3D = CPgBar3D(@pWindow, IDC_PGBAR2, "", 110, 15, 80, 23)
   pPgBar2.SetMaxSteps 33                                 ' Max number of teps
   pPgBar2.SetBarColor PGB_GOLD                           ' Bar color scheme
   pPgBar2.SetTextOn PGB_TEXTCUSTOM                       ' Show own text
   pPgBar2.SetBarTextColor BGR(255, 255, 0)               ' Backgound text color yellow
   pPgBar2.SetBarTextColor BGR(0, 0, 0)                   ' Bar text color black

   ' // Add the third progress bar
   DIM pPgBar3 AS CPgBar3D = CPgBar3D(@pWindow, IDC_PGBAR3, "", 190, 15, 80, 23)
   pPgBar3.SetMaxSteps 33                                 ' Max number of teps
   pPgBar3.SetBarColor PGB_GREEN                          ' Bar color scheme

   ' // Requires: Build the bars
   pPgBar1.BuildBar
   pPgBar2.BuildBar
   pPgBar3.BuildBar

   FUNCTION = pWindow.DoEvents(nCmdShow)

END FUNCTION
' ========================================================================================

James Fuller

  • Senior Member
  • ***
  • Posts: 283
  • FF3 User
Re: CWindow RC04
« Reply #2 on: May 02, 2016, 04:38:55 PM »

Jose,
  I noticed in your FBWThemes_HDPI_W7.xml no listing in the <!-- Compatibility section --> for Win 10.
Not needed?

James
           
Logged

José Roca

  • Moderator
  • Guru Member
  • *****
  • Posts: 3208
Re: CWindow RC04
« Reply #3 on: May 02, 2016, 05:15:38 PM »

Jose,
  I noticed in your FBWThemes_HDPI_W7.xml no listing in the <!-- Compatibility section --> for Win 10.
Not needed?

James
           

Guess that it is needed, but I don't have Windows 10 to test.

José Roca

  • Moderator
  • Guru Member
  • *****
  • Posts: 3208
Re: CWindow RC04
« Reply #4 on: May 02, 2016, 05:19:57 PM »

I have modified the Progress Bar slightly.

New code included in the attachment.

New examples also in the attachment.

José Roca

  • Moderator
  • Guru Member
  • *****
  • Posts: 3208
Re: CWindow RC04
« Reply #5 on: May 02, 2016, 05:22:38 PM »

This control from Börje is a very nice replacement to the Windows progress bar control, that I found very ugly.

José Roca

  • Moderator
  • Guru Member
  • *****
  • Posts: 3208
Re: CWindow RC04
« Reply #6 on: May 02, 2016, 05:38:53 PM »

I think that I'm going to store the pointer to the class in extra bytes of the window class instead of as a property.